Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC2 #0: Fri Feb  8 00:02:33 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80cac000.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff80cac1c0.
Preloaded elf obj module "/boot/kernel/ispfw.ko" at 0xffffffff80cac830.
Calibrating clock(s) ... i8254 clock: 1193186 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2333432171 Hz
CPU: Intel(R) Xeon(R) CPU            5140  @ 2.33GHz (2333.43-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
  AMD Features=0x20000800<SYSCALL,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 5354725376 (5106 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000dab000 - 0x00000000c52ddfff, 3293786112 bytes (804147 pages)
0x0000000100000000 - 0x000000016ffeffff, 1878982656 bytes (458736 pages)
avail memory  = 5157195776 (4918 MB)
ACPI APIC Table: <IBM    SERBLADE>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xfdfd0/0x0024 (v  2 IBM   )
ACPI: XSDT @ 0x0xcffcff00/0x003C (v  1 IBM    SERBLADE 0x00001001 IBM  0x45444F43)
ACPI: FACP @ 0x0xcffcfe40/0x0084 (v  2 IBM    SERBLADE 0x00001001 IBM  0x45444F43)
ACPI: DSDT @ 0x0xcffbce2b/0x27C2 (v  2 IBM    SERBLADE 0x00001000 INTL 0x20060707)
ACPI: FACS @ 0x0xcffcfd40/0x0040
ACPI: APIC @ 0x0xcffcfdc0/0x0074 (v  1 IBM    SERBLADE 0x00001001 IBM  0x45444F43)
ACPI: MCFG @ 0x0xcffcfd80/0x003C (v  1 IBM    SERBLADE 0x00001001 IBM  0x45444F43)
MADT: Found IO APIC ID 14, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 13, Interrupt 24 at 0xfec80000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xffffffff80bec400
registered firmware set <isp_1040>
firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xffffffff80bf1da0
registered firmware set <isp_1040_it>
firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xffffffff80bf9e60
registered firmware set <isp_1080>
firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xffffffff80c018e0
registered firmware set <isp_1080_it>
firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xffffffff80c0b7c0
registered firmware set <isp_12160>
firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xffffffff80c12560
registered firmware set <isp_12160_it>
firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xffffffff80c1c400
registered firmware set <isp_2100>
firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xffffffff80c2f000
registered firmware set <isp_2200>
firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xffffffff80c41da0
registered firmware set <isp_2300>
firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xffffffff80c5b820
registered firmware set <isp_2322>
firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xffffffff80c793e0
registered firmware set <isp_2400>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb  8 2008 00:01:14)
acpi0: <IBM SERBLADE> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.MEMC.MCHB -> bus 0 dev 16 func 1
AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.CFG2 -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  7
  Validation          0    7   N     0  7
  After Disable       0  255   N     0  7
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  7
  Validation          0    7   N     0  7
  After Disable       0  255   N     0  7
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  none
  Validation          0  255   N     0  none
  After Disable       0  255   N     0  none
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  7
  Validation          0    7   N     0  7
  After Disable       0  255   N     0  7
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  7
  Validation          0    7   N     0  7
  After Disable       0  255   N     0  7
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 728072806000728
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 728072806000728
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x25d8, revid=0xb1
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0544, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25f7, revid=0xb1
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e3, revid=0xb1
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e4, revid=0xb1
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e5, revid=0xb1
	domain=0, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e6, revid=0xb1
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x25e7, revid=0xb1
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages
found->	vendor=0x8086, dev=0x1a38, revid=0xb1
	domain=0, bus=0, slot=8, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xfe700000, size 10, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x25f0, revid=0xb1
	domain=0, bus=0, slot=16, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0xb1
	domain=0, bus=0, slot=16, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f0, revid=0xb1
	domain=0, bus=0, slot=16, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f1, revid=0xb1
	domain=0, bus=0, slot=17, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f3, revid=0xb1
	domain=0, bus=0, slot=19, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f5, revid=0xb1
	domain=0, bus=0, slot=21, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x25f6, revid=0xb1
	domain=0, bus=0, slot=22, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2690, revid=0x09
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2688, revid=0x09
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x2200, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2689, revid=0x09
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0x2600, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x268a, revid=0x09
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type I/O Port, range 32, base 0x2800, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 19
found->	vendor=0x8086, dev=0x268c, revid=0x09
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=7
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf9000000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xd9
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2670, revid=0x09
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2680, revid=0x09
	domain=0, bus=0, slot=31, func=2
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0045, statreg=0x02b8, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x2a00, size  4, enabled
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     7
pcib1:   subordinate bus   11
pcib1:   I/O decode        0x5000-0x5fff
pcib1:   memory decode     0xd5000000-0xd6ffffff
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI7 - AE_NOT_FOUND
pci7: <ACPI PCI bus> on pcib1
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x3500, revid=0x01
	domain=0, bus=7, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x350c, revid=0x01
	domain=0, bus=7, slot=0, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib2:   domain            0
pcib2:   secondary bus     9
pcib2:   subordinate bus   11
pcib2:   I/O decode        0x6000-0x5fff
pcib2:   no prefetched decode
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI7.PCI9 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib2
pci9: domain=0, physical bus=9
found->	vendor=0x8086, dev=0x3510, revid=0x01
	domain=0, bus=9, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x3514, revid=0x01
	domain=0, bus=9, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D2
	MSI supports 1 message, 64 bit
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pcib3:   domain            0
pcib3:   secondary bus     11
pcib3:   subordinate bus   11
pcib3:   I/O decode        0x6000-0x5fff
pcib3:   no prefetched decode
pci11: <ACPI PCI bus> on pcib3
pci11: domain=0, physical bus=11
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci9
pcib4:   domain            0
pcib4:   secondary bus     10
pcib4:   subordinate bus   10
pcib4:   I/O decode        0x6000-0x5fff
pcib4:   no prefetched decode
pci10: <ACPI PCI bus> on pcib4
pci10: domain=0, physical bus=10
pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci7
pcib5:   domain            0
pcib5:   secondary bus     8
pcib5:   subordinate bus   8
pcib5:   I/O decode        0x5000-0x5fff
pcib5:   memory decode     0xd5000000-0xd6ffffff
pcib5:   no prefetched decode
pci8: <ACPI PCI bus> on pcib5
pci8: domain=0, physical bus=8
found->	vendor=0x1077, dev=0x2312, revid=0x02
	domain=0, bus=8, slot=1, func=0
	class=0c-04-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x5000, size  8, enabled
pcib5: requested I/O range 0x5000-0x50ff: in range
pcib1: requested I/O range 0x5000-0x50ff: in range
	map[14]: type Memory, range 64, base 0xd6fff000, size 12, enabled
pcib5: requested memory range 0xd6fff000-0xd6ffffff: good
pcib1: requested memory range 0xd6fff000-0xd6ffffff: good
pcib5: matched entry for 8.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 25
found->	vendor=0x1077, dev=0x2312, revid=0x02
	domain=0, bus=8, slot=1, func=1
	class=0c-04-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x5100, size  8, enabled
pcib5: requested I/O range 0x5100-0x51ff: in range
pcib1: requested I/O range 0x5100-0x51ff: in range
	map[14]: type Memory, range 64, base 0xd6ffe000, size 12, enabled
pcib5: requested memory range 0xd6ffe000-0xd6ffefff: good
pcib1: requested memory range 0xd6ffe000-0xd6ffefff: good
pcib5: matched entry for 8.1.INTB
pcib5: slot 1 INTB hardwired to IRQ 26
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0
isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5000-0x50ff mem 0xd6fff000-0xd6ffffff irq 25 at device 1.0 on pci8
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd6fff000
isp0: using Memory space register mapping
ioapic1: routing intpin 1 (PCI IRQ 25) to vector 49
isp0: [MPSAFE]
isp0: [ITHREAD]
isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.19
isp0: 2K Logins Supported
isp0: 1024 max I/O command limit set
isp0: NVRAM Port WWN 0x210000145e25418a
isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5100-0x51ff mem 0xd6ffe000-0xd6ffefff irq 26 at device 1.1 on pci8
isp1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd6ffe000
isp1: using Memory space register mapping
ioapic1: routing intpin 2 (PCI IRQ 26) to vector 50
isp1: [MPSAFE]
isp1: [ITHREAD]
isp1: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.19
isp1: 2K Logins Supported
isp1: 1024 max I/O command limit set
isp1: NVRAM Port WWN 0x210000145e25418b
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     15
pcib6:   subordinate bus   15
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pcib6: could not get PCI interrupt routing table for \\_SB_.PCI0.PCIO - AE_NOT_FOUND
pci15: <ACPI PCI bus> on pcib6
pci15: domain=0, physical bus=15
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     12
pcib7:   subordinate bus   13
pcib7:   I/O decode        0x6000-0x5fff
pcib7:   no prefetched decode
pci12: <ACPI PCI bus> on pcib7
pci12: domain=0, physical bus=12
pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     14
pcib8:   subordinate bus   14
pcib8:   I/O decode        0x6000-0xffff
pcib8:   no prefetched decode
pci14: <ACPI PCI bus> on pcib8
pci14: domain=0, physical bus=14
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     3
pcib9:   subordinate bus   4
pcib9:   I/O decode        0x5000-0x4fff
pcib9:   memory decode     0xda000000-0xdcffffff
pcib9:   no prefetched decode
pci3: <ACPI PCI bus> on pcib9
pci3: domain=0, physical bus=3
found->	vendor=0x1166, dev=0x0103, revid=0xc3
	domain=0, bus=3, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib10: <PCI-PCI bridge> at device 0.0 on pci3
pcib10:   domain            0
pcib10:   secondary bus     4
pcib10:   subordinate bus   4
pcib10:   I/O decode        0x5000-0x4fff
pcib10:   memory decode     0xda000000-0xdcffffff
pcib10:   no prefetched decode
pci4: <PCI bus> on pcib10
pci4: domain=0, physical bus=4
found->	vendor=0x14e4, dev=0x16ac, revid=0x12
	domain=0, bus=4, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xda000000, size 25, enabled
pcib10: requested memory range 0xda000000-0xdbffffff: good
pcib9: requested memory range 0xda000000-0xdbffffff: good
pcib9: matched entry for 3.0.INTA
pcib9: slot 0 INTA hardwired to IRQ 17
pcib10: slot 0 INTA is routed to irq 17
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xda000000-0xdbffffff irq 17 at device 0.0 on pci4
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xda000000
bce0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 51
bce0: using IRQ 256 for MSI
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: OUI 0x0050ef, model 0x0015, rev. 1
brgphy0:  1000baseSX-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:1a:64:33:0c:e0
bce0: [MPSAFE]
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x03040405); Flags( MSI )
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib11:   domain            0
pcib11:   secondary bus     5
pcib11:   subordinate bus   6
pcib11:   I/O decode        0x5000-0x4fff
pcib11:   memory decode     0xd7000000-0xd9ffffff
pcib11:   no prefetched decode
pci5: <ACPI PCI bus> on pcib11
pci5: domain=0, physical bus=5
found->	vendor=0x1166, dev=0x0103, revid=0xc3
	domain=0, bus=5, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib12: <PCI-PCI bridge> at device 0.0 on pci5
pcib12:   domain            0
pcib12:   secondary bus     6
pcib12:   subordinate bus   6
pcib12:   I/O decode        0x5000-0x4fff
pcib12:   memory decode     0xd7000000-0xd9ffffff
pcib12:   no prefetched decode
pci6: <PCI bus> on pcib12
pci6: domain=0, physical bus=6
found->	vendor=0x14e4, dev=0x16ac, revid=0x12
	domain=0, bus=6, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xd8000000, size 25, enabled
pcib12: requested memory range 0xd8000000-0xd9ffffff: good
pcib11: requested memory range 0xd8000000-0xd9ffffff: good
pcib11: matched entry for 5.0.INTA
pcib11: slot 0 INTA hardwired to IRQ 19
pcib12: slot 0 INTA is routed to irq 19
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xd8000000-0xd9ffffff irq 19 at device 0.0 on pci6
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xd8000000
bce1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to vector 52
bce1: using IRQ 257 for MSI
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1: OUI 0x0050ef, model 0x0015, rev. 1
brgphy1:  1000baseSX-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:1a:64:33:0c:e2
bce1: [MPSAFE]
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x03040405); Flags( MFW MSI )
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib13:   domain            0
pcib13:   secondary bus     2
pcib13:   subordinate bus   2
pcib13:   I/O decode        0x4000-0x4fff
pcib13:   memory decode     0xdd000000-0xdeffffff
pcib13:   no prefetched decode
pcib13: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI2 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib13
pci2: domain=0, physical bus=2
found->	vendor=0x1000, dev=0x0056, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x14
	map[10]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib13: requested I/O range 0x4000-0x40ff: in range
	map[14]: type Memory, range 64, base 0xdeffc000, size 14, enabled
pcib13: requested memory range 0xdeffc000-0xdeffffff: good
	map[1c]: type Memory, range 64, base 0xdefe0000, size 16, enabled
pcib13: requested memory range 0xdefe0000-0xdefeffff: good
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
pcib13: slot 0 INTA is routed to irq 16
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xdeffc000-0xdeffffff,0xdefe0000-0xdefeffff irq 16 at device 0.0 on pci2
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x4000
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xdeffc000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x2200-0x221f irq 18 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2200
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 54
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x2600-0x261f irq 21 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2600
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 55
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x2800-0x281f irq 19 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2800
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 56
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9000000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 57
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 5 ports with 5 removable, self powered
uhub4: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2> on uhub3
uhub4: single transaction translator
uhub4: 2 ports with 2 removable, self powered
uhub5: <Cypress Semiconductor 4 Port Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub4
uhub5: 4 ports with 4 removable, self powered
umass0: <TEAC TEAC FD-05PUB, class 0/0, rev 2.00/0.00, addr 4> on uhub5
umass0:3:0:-1: Attached to scbus3
umass1: <In-System Design USB Storage Adapter, class 0/0, rev 1.10/1.00, addr 5> on uhub5
umass1:4:1:-1: Attached to scbus4
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib14:   domain            0
pcib14:   secondary bus     1
pcib14:   subordinate bus   1
pcib14:   I/O decode        0x3000-0x3fff
pcib14:   memory decode     0xf8000000-0xf8ffffff
pcib14:   prefetched decode 0xf0000000-0xf7ffffff
pcib14:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib14
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x515e, revid=0x02
	domain=0, bus=1, slot=1, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled
pcib14: requested memory range 0xf0000000-0xf7ffffff: good
	map[14]: type I/O Port, range 32, base 0x3000, size  8, enabled
pcib14: requested I/O range 0x3000-0x30ff: in range
	map[18]: type Memory, range 32, base 0xf8000000, size 16, enabled
pcib14: requested memory range 0xf8000000-0xf800ffff: good
pcib14: matched entry for 1.1.INTA
pcib14: slot 1 INTA hardwired to IRQ 22
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf8000000-0xf800ffff irq 22 at device 1.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2a00-0x2a0f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2a00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 58
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 59
ata1: [MPSAFE]
ata1: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 60
sio0: [FILTER]
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff,0xcc000-0xcd7ff,0xcd800-0xcdfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 61
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
uhub6: <Cypress Semiconductor 4 Port Hub, class 9/0, rev 1.10/0.01, addr 2> on uhub0
uhub6: 4 ports with 4 removable, bus powered
ukbd0: <IBM PPC I/F, class 0/0, rev 1.10/0.01, addr 3> on uhub6
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <IBM PPC I/F, class 0/0, rev 1.10/0.01, addr 3> on uhub6
ukbd1: <IBM HIDK/M, class 0/0, rev 1.10/0.01, addr 4> on uhub6
kbd3 at ukbd1
kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
ums0: <IBM HIDK/M, class 0/0, rev 1.10/0.01, addr 4> on uhub6
ums0: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
procfs registered
lapic: Divisor 2, Frequency 166673739 hz
Timecounter "TSC" frequency 2333432171 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
isp1: Other Change Notify
isp1: Point-to-Point mode
isp1: Loop UP
isp0: Other Change Notify
isp0: Point-to-Point mode
isp1: Port Database Changed
isp0: Loop UP
isp1: Port Database Changed
isp0: Port Database Changed
isp1: Port Database Changed
isp0: Port Database Changed
isp0: Port Database Changed
isp0: Firmware State <Config Wait->Ready>
isp1: Firmware State <Config Wait->Ready>
isp1: 2Gb link speed/s
isp1: HBA PortID 0x040900 N-Port Handle 65535, Connection Topology 'F Port'
isp1: HBA WWNN 0x200000145e25418b HBA WWPN 0x210000145e25418b
isp0: 2Gb link speed/s
isp0: HBA PortID 0x030900 N-Port Handle 65535, Connection Topology 'F Port'
isp0: HBA WWNN 0x200000145e25418a HBA WWPN 0x210000145e25418a
isp1: PortID 0x040f00 handle 0x0 role Target arrived at tgt 0
      WWNN 0x200400a0b819b234 WWPN 0x200400a0b819b235
isp1: PortID 0x020f00 handle 0x1 role Target arrived at tgt 1
      WWNN 0x200600a0b8198b3a WWPN 0x200600a0b8198b3b
isp1: PortID 0xfffffe handle 0x7e role (none) stayed
      WWNN 0x100000c0dd074833 WWPN 0x200900c0dd074833
isp0: PortID 0x030f00 handle 0x0 role Target arrived at tgt 0
      WWNN 0x200400a0b819b234 WWPN 0x200500a0b819b235
isp0: PortID 0x010f00 handle 0x1 role Target arrived at tgt 1
      WWNN 0x200600a0b8198b3a WWPN 0x200700a0b8198b3b
isp0: PortID 0xfffffe handle 0x7e role (none) stayed
      WWNN 0x100000c0dd0c525c WWPN 0x200900c0dd0c525c
(probe512:isp1:0:0:0): Retrying Command
(probe1088:umass-sim1:1:0:0): Retrying Command
(probe1088:umass-sim1:1:0:0): error 22
(probe1088:umass-sim1:1:0:0): Unretryable Error
(probe1088:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0?
(probe1087:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe1087:umass-sim0:0:0:0): Retrying Command
(probe1087:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe1087:umass-sim0:0:0:0): Retrying Command
(probe1087:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe1087:umass-sim0:0:0:0): Retrying Command
(probe1087:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe1087:umass-sim0:0:0:0): Retrying Command
(probe1087:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe1087:umass-sim0:0:0:0): error 5
(probe1087:umass-sim0:0:0:0): Retries Exausted
(probe1087:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass0 at isp0 bus 0 target 0 lun 0
pass0: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
pass0: Serial Number 1T53885958      
pass0: 200.000MB/s transfers
pass0: Command Queueing Enabled
pass1 at isp0 bus 0 target 1 lun 0
pass1: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
pass1: Serial Number 1T53885285      
pass1: 200.000MB/s transfers WWNN 0x200600a0b8198b3a WWPN 0x200700a0b8198b3b PortID 0x10f00
pass1: Command Queueing Enabled
pass2 at isp1 bus 0 target 0 lun 0
pass2: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
pass2: Serial Number 1T53885926      
pass2: 200.000MB/s transfers
pass2: Command Queueing Enabled
pass3 at isp1 bus 0 target 1 lun 0
pass3: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
pass3: Serial Number 1T53887955      
pass3: 200.000MB/s transfers WWNN 0x200600a0b8198b3a WWPN 0x200600a0b8198b3b PortID 0x20f00
pass3: Command Queueing Enabled
pass4 at umass-sim0 bus 0 target 0 lun 0
pass4: <TEAC FD-05PUB 3200> Removable Direct Access SCSI-0 device 
pass4: 1.000MB/s transfers
pass5 at umass-sim1 bus 1 target 0 lun 0
pass5: <HL-DT-ST DVD-ROM GDR8082N 0L03> Removable CD-ROM SCSI-0 device 
pass5: 1.000MB/s transfers
GEOMda0 at isp0 bus 0 target 0 lun 0
da0: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
da0: Serial Number 1T53885958      
da0: 200.000MB/s transfers
da0: Command Queueing Enabled
da0: 102400MB (209715200 512 byte sectors: 255H 63S/T 13054C)
da2 at isp1 bus 0 target 0 lun 0
da2: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
da2: Serial Number 1T53885926      
da2: 200.000MB/s transfers
da2: Command Queueing Enabled
da2: 102400MB (209715200 512 byte sectors: 255H 63S/T 13054C)
da3 at isp1 bus 0 target 1 lun 0
da3: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
da3: Serial Number 1T53887955      
da3: 200.000MB/s transfers WWNN 0x200600a0b8198b3a WWPN 0x200600a0b8198b3b PortID 0x20f00
da3: Command Queueing Enabled
da3: 102400MB (209715200 512 byte sectors: 255H 63S/T 13054C)
da1 at isp0 bus 0 target 1 lun 0
da1: <IBM 1722-600 0914> Fixed Direct Access SCSI-5 device 
da1: Serial Number 1T53885285      
da1: 200.000MB/s transfers WWNN 0x200600a0b8198b3a WWPN 0x200700a0b8198b3b PortID 0x10f00
da1: Command Queueing Enabled
da1: 102400MB (209715200 512 byte sectors: 255H 63S/T 13054C)
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
cd0 at umass-sim1 bus 1 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDR8082N 0L03> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk da4
GEOM: new disk cd0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
ioapic1: Assigning PCI IRQ 25 to local APIC 0
ioapic1: Assigning PCI IRQ 26 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 0
msi: Assigning MSI IRQ 257 to local APIC 1
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
GEOM_MIRROR: Cannot add disk da2 to gm0 (error=17).
GEOM_MIRROR: Cannot add disk da3 to gm0 (error=17).
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): error 5
(da4:umass-sim0:0:0:0): Retries Exausted
(da4:umass-sim0:0:0:0): got CAM status 0x4
(da4:umass-sim0:0:0:0): fatal error, failed to attach to device
(da4:umass-sim0:0:0:0): lost device
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): Retrying Command
(da4:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da4:umass-sim0:0:0:0): error 5
(da4:umass-sim0:0:0:0): Retries Exausted
(da4:umass-sim0:0:0:0): removing device entry
Opened disk da4 -> 5
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
(cd0:umass-sim1:1:0:0): error 6
(cd0:umass-sim1:1:0:0): Unretryable Error
Trying to mount root from ufs:/dev/mirror/gm0s1a
start_init: trying /sbin/init
bce0: Gigabit link up